5.0 ★★★★★ | Rated in Islamabad • Motorway Service Rd, H-16 Zamar Valley

Engineered for Strength.
Built for Islamabad.

Precision hydraulic-pressed solid & hollow concrete blocks, heavy-duty interlocking tuff pavers, and road kerbstones manufactured directly at our H-16 facility for residential, commercial, and infrastructure projects across Islamabad & Rawalpindi.

Direct Motorway M-1/M-2 & Kashmir Highway access for rapid crane-truck delivery.
SPEC SHEET // ISO-GRADE MASONRY

Standard 16" × 8" × 8" Hollow Unit

1500–2500 PSI
16 INCHES (406mm) 8" WIDTH 8" THERMAL & ACOUSTIC CORE HIGH-DENSITY FACE SHELL
Compaction Vibro-Hydraulic
Tolerance ± 1.5 mm
Curing 14-Day Water

High PSI Strength

Load-bearing & commercial structural compliance

Hydraulic Pressing

Automated high-frequency vibration & compaction

Twin Cities Delivery

Fast dispatch to H-16, G-13, DHA, Bahria & TopCity-1

Open 7 Days a Week

Including Sundays & extended Friday hours (7 AM – 6 PM)

FACTORY DIRECT INVENTORY

Precision Masonry & Paving Units

Manufactured to strict dimensional accuracy so your masons save up to 30% on mortar and plastering costs.

BESTSELLER 1500+ PSI
Concrete Blocks

16" × 8" × 8" Hollow Block

Dual-cavity structural concrete block offering superior thermal insulation, soundproofing, and reduced dead load on multi-story RCC frames.

Dimensions: 16" L × 8" W × 8" H
Compressive Strength: 1,500 – 2,000 PSI
Ideal For: Exterior Walls & Boundary Walls
HEAVY LOAD 2500+ PSI
Concrete Blocks

16" × 8" × 6" Solid Block

High-density solid masonry unit engineered for load-bearing foundations, basements, retaining walls, and heavy industrial structures.

Dimensions: 16" L × 6" W × 8" H
Compressive Strength: 2,200 – 2,800 PSI
Ideal For: Foundations & Load-Bearing Walls
INTERIOR SLIM 1800+ PSI
Concrete Blocks

16" × 8" × 4" Partition Block

Space-saving 4-inch precision block with razor-sharp edges for internal room partitions, commercial plazas, and parapet walls.

Dimensions: 16" L × 4" W × 8" H
Compressive Strength: 1,800 – 2,200 PSI
Ideal For: Internal Partitions & Parapets
60MM & 80MM 5000+ PSI
Tuff Pavers

Interlocking Tuff Pavers

High-density abrasion-resistant interlocking pavers in Grey, Red, and Charcoal finishes. Engineered to withstand heavy vehicular axle loads.

Thickness Options: 60mm (Driveways) / 80mm (Heavy)
Compressive Strength: 5,000 – 7,000 PSI
Ideal For: Driveways, Streets, Warehouses
CDA / RDA SPEC 4000+ PSI
Kerbstones & Curbs

Heavy-Duty Road Kerbstones

Hydraulic-pressed chamfered road kerbs and edge restraints built to municipal highway standards for housing societies and commercial roads.

Standard Size: 18" × 12" × 6" / 24" × 12" × 6"
Compressive Strength: 4,000+ PSI
Ideal For: Road Edges, Medians & Walkways
ARCHITECTURAL MULTI-COLOR
Tuff Pavers

Rectangular Cobble Pavers

Classic 200mm × 100mm brick-format pavers for herringbone and basketweave patterns in modern residential porches, parks, and walkways.

Dimensions: 200mm × 100mm × 60mm
Colors Available: Natural Grey, Terracotta, Charcoal
Ideal For: Porches, Courtyards & Parks
CONTRACTOR & BUILDER UTILITY

Instant Wall & Block Estimator

Enter your wall dimensions below to calculate exact block quantities (accounting for standard mortar joints) and send your estimate straight to our H-16 dispatch desk.

1. Enter Wall Specifications

FT
FT
Include 5% Site Wastage & Cutting Allowance Recommended by engineers for corner cuts & electrical conduits
LIVE ESTIMATE

2. Material Requirement

Total Wall Area 500 Square Feet
Units Needed 591 Blocks (incl. 5% wastage)
Selected Specification: 16x8x8 Hollow Block
Net Blocks (Before Wastage): 563 units
Estimated Mortar Cement Bags: ~7 Bags (OPC)
QUALITY CONTROL PROTOCOL

Why Top Contractors Trust Our Blocks

Every batch produced at our Motorway Service Rd plant undergoes strict aggregate grading and hydraulic pressure calibration.

01

Graded Crush & Sand

Silt-free Lawrencepur/washed river sand combined with sieved Margalla/Sargodha crush aggregate for zero internal voids.

02

Precision OPC Ratio

Exact batch-controlled Ordinary Portland Cement (53-Grade OPC) dosing with low water-cement ratio for maximum early & 28-day strength.

03

Vibro-Hydraulic Press

High-tonnage hydraulic rams paired with synchronized table vibration ensure uniform density and crisp, chip-resistant corners.

04

Controlled Water Curing

Dedicated curing yards with scheduled sprinkler hydration prevent shrinkage hairline cracks before palletized dispatch.

VISIT OR DISPATCH FROM PLANT

Factory Location & Hours

Plant Address

Motorway Service Rd, near District Jail, Zamar Valley H-16 Islamabad, 44000

★ Strategic location near M-1/M-2 Motorway Interchange & Srinagar Highway for zero-bottleneck heavy truck transit.

Factory Operating Hours

Open 7 Days
  • Monday – Thursday 9:00 AM – 5:00 PM
  • Friday EXTENDED 7:00 AM – 6:00 PM
  • Saturday 9:00 AM – 5:00 PM
  • Sunday 9:00 AM – 5:00 PM
DIRECT FACTORY RATES • NO MIDDLEMAN

Request a Factory Quote

Get wholesale per-unit pricing and crane-truck freight rates for your construction site in Islamabad or Rawalpindi.